1st COMMENT ---第1處

Backplates for these watches should be as follows: ----每款手表的底殼如下圖

NEW MOON – Should be silver (which it is at the moment).----月亮手表底殼是銀色，對的

RED PLANET – Should be rose gold (at the moment it is silver).----火星手表底殼應該是玫瑰金的，現在是銀色的， 做貨時需要底殼的電鍍顏色跟外殼一致

FOREST EARTH – Should be rose gold (at the moment it is silver). ----地球手表底殼應該是玫瑰金的，現在是銀色的， 做貨時需要底殼的電鍍顏色跟外殼一致

CGI EXAMPLES

REAL LIFE EXAMPLES (Samples)

2nd COMMENT----第2處

Circular Brushed Effect on the backplate centre/center. ---底殼的拉絲效果

Looking at these samples RED PLANET & FOREST EARTH the brushed effect is perfect it goes to the full of the centre/center circle (plate). While the NEW MOON it looks like its not finished up to the end, photo below:-----火星跟地球的整個底殼拉絲效果是充滿的，月亮的那個底殼的拉絲效果沒有充滿，邊緣部分是光滑的，沒有拉絲

3rd COMMENT---第3處

NEW MOON – is missing the crown LOGO. RED PLANET & FOREST EARTH is fine, they have the logo printed/lasered.---月亮手表的把頭沒有LOGO， 火星跟地球手表巴頭是有LOGO的

4th COMMENT---第4處

NEW MOON distance/gap between the crown and the case is too small, not the same as per (RED PLANET & FOREST EARTH). Thus, it is harder to wind the watch.----月亮的把頭跟手表連接的非常細，火星跟地球手表的巴頭連接距離非常合適。

Forest Earth & Red Planet distance between the crown and case is perfect and easy to wind.

5th COMMENT—第5處

Planet Prints: all the planet prints look great (Sulan said/mentioned that the print quality can be improved). But there is one small issue with the MOON planet print. It has this bluish/Cyan/purple tint to it. Could it please be just BLACK & WHITE, no other colour information in it. Like in this example below: Just black and white.----所有的星球打印的圖片是OK的，但量產時時可以更清晰，以及月亮的圖片是否能按原圖黑白色效果，現在打印的圖片效果有呈藍紫色。

We love the other planet colours (earth and mars colours are perfect) photos with a phone do not show that very well. But, yes probably the print quality in general could be better. Higher DPI/PPI on the print itself. (I did include the Moon planet image in the DROPBOX link again, just in case.)

------客戶這次提供了AI格式的圖片，這個格式的圖片打印出來不會因?yàn)閳D片縮小質量受損而變形

6th COMMENT—第6處

Hour hand and minute hand small circles that should align together. Could we please make sure that the circles align together. NEW MOON & RED PLANET is aligning very well. But the FOREST EARTH not so well there is a visible offset. Not saying that will align 100% perfectly because if the -----下面圖中，時針跟分針的圈應該是重合一起的。在生產的時候要注意這個。樣板月亮手表和火星手表的圈重合的非常好。但是地球手表，此處圈圈有點分離，請查看下圖。

bended/dome glass piece/refraction etc. But the mars watch and the moon is fine, it is just the earth watch I can see that the small circles are not aligning as well as the other two watches.

7th COMMENT---第7處

12 Hour Index Alignment.---12點鐘位置

Could we please try to align 12/twelve-hour indexes in one straight line as close as possible. You can remove the tiny gap/space between them if need be. We can push them close to each other at 100%. No need for a gap in between them.----12點鐘位置的2條直線能否最緊密靠近？中間不需要留縫，這樣這2條線的底部和上部就能完全對齊，不會出現一長一短的情況。請看下圖箭頭和直線位置。

8th COMMENT – Request----第8處，需要表帶上增加的LOGO壓印

Strap Logo. We would like to have our logo without words embossed (as per GENUINE LEATHER) to the top bit of the strap if it would be possible, please let us know. (P.S – the strap itself is PERFECT)---表帶上的logo，我們希望表帶上印上logo圖（沒有文字的LOGO），類似下面真皮那樣的英文字母。請確認是否可以

9th COMMENT – Request---第9處

Original Buckle Design. We are not sure if this would be possible, but with the previous supplier we asked if it would be possible to make this kind of buckle and they said no.

Here, is the design below – this is a CGI not a real photo, it would need to be amended a bit I think to not bend the strep too much when you buckle it in, but this is the concept that we would love to make/have. Please let us know if this would be possible to create?

We are wondering how much this would cost us to make.?

10th COMMENT – Request

Watch Box Design. We would like to have a box design like in the images/CGIS below. We are open for suggestions as well, but in general would be nice to achieve/get/produce something similar as in our CGIS. Black thin flat box. The watch would go as a whole flat. Our current watch now (the samples that we have from you are 24cm in length). So, we think the box should be a little longer than that.

Our logos printed as shown in the CGIS, would be nice to have a silver like/semi reflective material for the logo. Also, the box would have this kind of shell/drawer around like in the CGI. And of, course some nice velvet like looking material inside with black straps to hold the watch. (High resolution cgis of the box are included in the drop box link).

BOX CGIS DESIGN

We do not know what materials would work for this box best, but we assume the box cover shell on the outside would be some kind of thicker paper.

The box itself very thick paper or plastic.

The inside should have this black fabric/velvet looking like material.

If any issues with these comments or you will need some extra information/CGIS/photos please contact us Sulan.